Fencing & Boundaries

Gates

A gate is the part of a boundary that gets used every single day, so it is the part worth getting right. We make and hang timber gates to fit the opening you actually have, from side gates and garden gates through to driveway and field gates. Properly braced, hung on quality ironmongery, and squared up so it still swings cleanly in a few years time.

Side, garden, driveway and field gates
Made to fit the opening
Quality hinges, latches and drop bolts
Matched to your fencing
Bespoke timber double driveway gates fitted in Norfolk
Hand-braced rear of bespoke timber driveway gates
Traditional five-bar timber field gate on a gravel driveway
Closeboard fencing fitted with wrought iron gates
Bespoke timber double driveway gates fitted in Norfolk
Hand-braced rear of bespoke timber driveway gates

Gates made, hung and made to keep working

A gate is the part of a fence that has to move, which is why it is almost always the part that fails first. Sagging, dragging on the ground, a latch that no longer lines up: all of it comes from a gate that was too heavy for its hardware or hung on a post that was never braced for the load.

We make timber gates to measure and hang them properly, from a side gate on a narrow passage to a five-bar gate across a driveway. Made in sustainably sourced timber, braced correctly, and hung on ironmongery chosen for the actual weight of the gate.

Side and garden gates

The everyday gate: pedestrian width, matched to the fence it sits in so it reads as part of the run rather than an afterthought. We can make it to match close-board, panel or picket fencing, with or without a lock, and hang it to open whichever way the space allows.

Driveway and double gates

Double gates need to meet cleanly in the middle and still do so in five years. That means seriously braced hanging posts, set deep and in the right ground, and hinges rated for the leaf weight. We make them in matching pairs with a drop bolt into the ground and a catch that lines up, and we will talk you through opening in, opening out, and where the gates will sit when they are open.

Five-bar and field gates

The traditional five-bar gate, in timber, hung on a proper heel post. Suits a rural driveway, a paddock entrance or a track, and looks right in a Norfolk setting in a way that a metal gate does not. Braced diagonally from the hanging side so the weight is carried correctly.

Bracing and ironmongery

The diagonal brace on a timber gate has to run from the bottom of the hinge side upwards, so it works in compression and pushes the weight back into the post. Get it the wrong way round and the gate is hanging off a joint. It is a small detail that decides whether the gate still shuts properly next winter, and it is one of the first things we look at when we are called out to fix somebody else's gate.

Where we work

We are based in Brundall, just east of Norwich, and cover the city and the surrounding villages — including Blofield, Brundall, Postwick, Great Plumstead and Thorpe End. If you are not sure whether we reach you, call Nick on 07377 222997 and he will tell you straight away. Every quote is free and comes with no obligation.

Common questions

Can you match a new gate to my existing fence?
Usually, yes. If the fence is a standard close-board, panel or picket style we can build a gate in the same timber and profile so it does not stand out. If the fence is old and weathered the new gate will be lighter in colour to start with and will tone in over a season.
My gate has dropped. Can it be repaired?
Often it can. If the gate itself is sound the problem is usually the hanging post or the hinges, both of which can be dealt with without making a new gate. If the frame joints have gone, a new gate is the better spend. Nick will tell you which it is.
Do you fit automated or electric gates?
We make and hang the timber gates and the posts. We are not electricians, so for automation we would build to suit the gear and work alongside whoever is installing it.
How wide can a driveway gate be?
Wide enough for most domestic driveways, but past a certain width a single leaf becomes too heavy to hang well, which is where a pair of gates comes in. Nick will measure the opening and advise on single versus double at the site visit.
Request a Quote

Ready to start your project?

Free Quotes Licensed Waste Carrier Sustainably Sourced Timber

Related Services

Explore Our Full Range

Fencing, gates, decking, sheds, pergolas and garden timbercraft across Norwich and the surrounding villages.